2550 Furniture hardware surface mount square kitchen cabinet handles

Product description

The 2550 Furniture Hardware Surface Mount Square Kitchen Cabinet Handles feature a square shape with simple and sleek lines, offering a modern aesthetic. Its surface is finely ground and polished, providing a smooth and delicate touch. The handle is of a good size, striking a balance between being neither too bulky nor too small.

Installation is made convenient with its surface-mounted method, eliminating the need for drilling holes in the cabinet door. This not only preserves the integrity of the cabinet door but also simplifies the installation process. The fixing screw is cleverly designed and hidden under the handle, preserving the overall beauty of the appearance.

The surface treatment of the 2550 Furniture Hardware surface-mounted square kitchen cabinet handles employs advanced electroplating technology. This results in a smooth and delicate handle surface, offering a gentle touch while enhancing corrosion resistance and anti-oxidation performance.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and direction of the handle should be consistent.
3. Drawer panels, upper flip-up doors, and lower flip-up door handles must be installed horizontally.
4. The upper cabinet door panel handle is installed below the door panel, and the lower cabinet door panel handle is installed above the door panel.
5. The installation position of the handle of the tall (long) cabinet door panel is determined through negotiation based on the height of the owner. Do not blindly decide on your own.
6. The handles of drawer panels, bottom flip doors, top flip doors, and door panels with door accessories are generally installed in the width center of the door panels. The handles of door panels that open doors are generally installed on the side away from the installation hinges.
7. There are two installation heights for the handles of the drawer panel. They can be installed at the height center of the panel or at the same height from the upper edge of the panel.
8. When installing the handle, the distance between the edge hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shapes on the surface (such as solid wood door panels), be sure to confirm with the owner, because sometimes the handles selected by the designer may not be suitable for installation, and the installation effect will be very unsightly.