901 Electroplated single hole wardrobe drawer handle

Product description

The surface of the Electroplated single-hole wardrobe drawer handle is electroplated, which not only enhances the corrosion resistance but also gives the handle a smooth and bright appearance. The plating can be chrome, nickel or other metals, which are available in different colors and textures to suit a variety of home decor styles.

This pull also features attention to detail. The single-hole design not only facilitates installation but also makes the handle lighter and will not bring additional burden to the wardrobe. Users simply drill a hole in the drawer or cabinet door and secure the handle in place through the hole. This design also reduces errors during installation since only one hole needs to be aligned. At the same time, the handle is also very comfortable to hold, making it easy for both adults and children to hold it and open and close the drawer.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and direction of the handle should be consistent.
3. Drawer panels, upper flip-up doors, and lower flip-up door handles must be installed horizontally.
4. The upper cabinet door panel handle is installed below the door panel, and the lower cabinet door panel handle is installed above the door panel.
5. The installation position of the handle of the tall (long) cabinet door panel is determined through negotiation based on the height of the owner. Do not blindly decide on your own.
6. The handles of drawer panels, bottom flip doors, top flip doors, and door panels with door accessories are generally installed in the width center of the door panels. The handles of door panels that open doors are generally installed on the side away from the installation hinges.
7. There are two installation heights for the handles of the drawer panel. They can be installed at the height center of the panel or at the same height from the upper edge of the panel.
8. When installing the handle, the distance between the edge hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shapes on the surface (such as solid wood door panels), be sure to confirm with the owner, because sometimes the handles selected by the designer may not be suitable for installation, and the installation effect will be very unsightly.