110 Bright chrome zinc alloy cabinet drawer double hole handle

Product description

110 Bright chrome zinc alloy cabinet drawer double-hole handle is a handle with bright chrome surface treatment, which is made of zinc alloy material. The bright chrome finish gives this handle a shiny appearance, adding to the overall aesthetics of the cabinet. This type of pull usually has two holes for mounting on both sides of the cabinet drawer. The bright chromium zinc alloy material has the characteristics of corrosion resistance, wear resistance and high temperature resistance, so this handle is not easy to rust, deform or be damaged. Its design is simple and elegant, suitable for various styles, and provides convenient functions of opening and closing the drawer.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and direction of the handle should be consistent.
3. Drawer panels, upper flip-up doors, and lower flip-up door handles must be installed horizontally.
4. The upper cabinet door panel handle is installed below the door panel, and the lower cabinet door panel handle is installed above the door panel.
5. The installation position of the handle of the tall (long) cabinet door panel is determined through negotiation based on the height of the owner. Do not blindly decide on your own.
6. The handles of drawer panels, bottom flip doors, top flip doors, and door panels with door accessories are generally installed in the width center of the door panels. The handles of door panels that open doors are generally installed on the side away from the installation hinges.
7. There are two installation heights for the handles of the drawer panel. They can be installed at the height center of the panel or at the same height from the upper edge of the panel.
8. When installing the handle, the distance between the edge hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shapes on the surface (such as solid wood door panels), be sure to confirm with the owner, because sometimes the handles selected by the designer may not be suitable for installation, and the installation effect will be very unsightly.