581 Aluminum alloy electroplating cabinet drawer shoe cabinet handle

Product description

581 Aluminum alloy electroplating cabinet drawer shoe cabinet handle is a high-end and luxurious surface treatment process, which is often used for the surface treatment of furniture to enhance the appearance, texture and durability of the product. On furniture such as cabinets, drawers, and shoe cabinets, handles are devices used to facilitate the opening and closing of furniture. European aluminum alloy electroplating cabinet drawer shoe cabinet handles usually refer to the aluminum alloy material processed by electroplating process to make European-style furniture handles, which are both decorative and practical. This handle has the characteristics of stainless, anti-oxidation, and durability. At the same time, it has a European-style design, adding a sense of modernity and sophistication to the furniture.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and orientation of the handles must be unified.
3. The handles of drawer panels, flip doors, and flip doors are all installed horizontally.
4. The upper cabinet door handles are installed below the door panels, and the lower cabinet door handles are installed above the door panels.
5. The installation position of the high (long) cabinet door handle is determined by negotiation based on the owner's height, and must not be blindly decided.
6. The handles of drawer panels, flip doors, flip doors, and door panels with door-type accessories are generally installed in the center of the width of the door panel, and the handles of the door panels are generally installed on the side away from the installation hinge.
7. There are two installation heights for the handles of the drawer panel, which can be installed at the center of the panel height or at a uniform height from the upper edge of the panel.
8. When installing the handle, the distance between the side hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shaped surfaces (such as solid wood door panels), be sure to confirm with the owner, because the handles selected by the designer may not be suitable for installation and the installed effect may not look good.