701 curved arch aluminum alloy electroplating cabinet drawer handle

Product description

701 curved arched aluminum alloy electroplated cabinet drawer handle, this handle is made of aluminum alloy and is processed by exquisite electroplating technology. It not only has a smooth and bright surface, but also has the advantages of rust resistance, oxidation resistance, and durability. It is not easy to rust and discolor after long-term use, and maintains a good appearance. The handle has a unique design, soft and smooth lines, and the arched shape presents an elegant curve beauty, which adds a lot to the furniture and makes the overall space more fashionable and modern. This handle is suitable for various styles of furniture, such as cabinets, drawers, shoe cabinets, etc. It not only has practical functions, but can also be used as a decoration for furniture to enhance the overall beauty.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and orientation of the handles must be unified.
3. The handles of drawer panels, flip doors, and flip doors are all installed horizontally.
4. The upper cabinet door handles are installed below the door panels, and the lower cabinet door handles are installed above the door panels.
5. The installation position of the high (long) cabinet door handle is determined by negotiation based on the owner's height, and must not be blindly decided.
6. The handles of drawer panels, flip doors, flip doors, and door panels with door-type accessories are generally installed in the center of the width of the door panel, and the handles of the door panels are generally installed on the side away from the installation hinge.
7. There are two installation heights for the handles of the drawer panel, which can be installed at the center of the panel height or at a uniform height from the upper edge of the panel.
8. When installing the handle, the distance between the side hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shaped surfaces (such as solid wood door panels), be sure to confirm with the owner, because the handles selected by the designer may not be suitable for installation and the installed effect may not look good.