8413 Brass vintage drawer hardware furniture wardrobe handle

Product description

8413 brass retro drawer hardware furniture wardrobe handle, made of high-quality all-copper material, corrosion-resistant, wear-resistant, and not easy to discolor after long-term use. It has high durability and stability, and can maintain its new appearance and use effect for a long time. In terms of furniture decoration, this kind of handle can be said to be quite versatile. It can be used not only on wardrobes, drawers and other furniture, but also on desks, bookcases, sideboards and other types of furniture, adding a sense of simplicity and elegance to the home. . Especially in retro-style home decoration, it is an indispensable decorative element, which can create an ancient yet noble atmosphere for the entire home.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and direction of the handle should be consistent.
3. Drawer panels, upper flip-up doors, and lower flip-up door handles must be installed horizontally.
4. The upper cabinet door panel handle is installed below the door panel, and the lower cabinet door panel handle is installed above the door panel.
5. The installation position of the handle of the tall (long) cabinet door panel is determined through negotiation based on the height of the owner. Do not blindly decide on your own.
6. The handles of drawer panels, bottom flip doors, top flip doors, and door panels with door accessories are generally installed in the width center of the door panels. The handles of door panels that open doors are generally installed on the side away from the installation hinges.
7. There are two installation heights for the handles of the drawer panel. They can be installed at the height center of the panel or at the same height from the upper edge of the panel.
8. When installing the handle, the distance between the edge hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shapes on the surface (such as solid wood door panels), be sure to confirm with the owner, because sometimes the handles selected by the designer may not be suitable for installation, and the installation effect will be very unsightly.