K621 handle-exposed zinc alloy dressing table cabinet handle

Product description

621 handle - exposed zinc alloy dressing table cabinet handle, made of zinc alloy, which has high strength, corrosion resistance and is not easy to deform. Electroplating process, the surface coating is smooth and wear-resistant. It is a practical, beautiful and safe product suitable for various decoration styles and home environments. Through reasonable installation, its advantages can be fully utilized to add convenience and beauty to home life. In terms of practicality, this handle also performs well. It has a comfortable grip, smooth switching, and can easily handle various usage scenarios. Whether you're opening a dresser drawer or pulling open a cabinet door, it can help. We also pay special attention to the environmental performance of our products. This handle strictly follows environmental protection standards during the production process and uses non-toxic and harmless raw materials and processes to ensure that the product will not cause any harm to the human body and the environment during use.

Exposed handle installation location:
1. Handles are generally divided into horizontal installation and vertical installation. Regardless of whether they are installed horizontally or vertically, they must be unified.
2. The shape and direction of the handle should be consistent.
3. Drawer panels, upper flip-up doors, and lower flip-up door handles must be installed horizontally.
4. The upper cabinet door panel handle is installed below the door panel, and the lower cabinet door panel handle is installed above the door panel.
5. The installation position of the handle of the tall (long) cabinet door panel is determined through negotiation based on the height of the owner. Do not blindly decide on your own.
6. The handles of drawer panels, bottom flip doors, top flip doors, and door panels with door accessories are generally installed in the width center of the door panels. The handles of door panels that open doors are generally installed on the side away from the installation hinges.
7. There are two installation heights for the handles of the drawer panel. They can be installed at the height center of the panel or at the same height from the upper edge of the panel.
8. When installing the handle, the distance between the edge hole of the handle and the edge of the board is generally 45mm.
9. When installing handles on door panels with shapes on the surface (such as solid wood door panels), be sure to confirm with the owner, because sometimes the handles selected by the designer may not be suitable for installation, and the installation effect will be very unsightly.