Product description
K608 single hook, double hook, triple hook, five hook zinc alloy clothes hook. Zinc alloy has the advantages of corrosion resistance, wear resistance, high strength, good plasticity, etc. It is not easy to rust, has a high surface gloss, and has various shapes, which can meet the needs of different home decoration styles. The single hook entrance wall hanging is suitable for hanging a small amount of clothing. It is suitable for the entrance or aisle with a relatively narrow space. The simple design and small size. The double hook design allows it to hang multiple coats, hats, scarves, etc., which is very suitable for scenes with more family members. The three-hook design makes the hook more diversified. Different types of clothing can be hung according to actual needs, making the entrance neat and orderly. The five-hook design is usually more complicated, requiring a larger hook space and load-bearing capacity, and is suitable for entrance scenes with more family members and complex needs.
Installation method: positioning, drilling and fixing.
1. Positioning: The installation position of the clothes hook must be determined, including width and height. Therefore, attention should be paid to the width distance between single clothes hooks. It should not be too close or too far. It should be reasonably calculated based on the width of the installation surface to separate the distance between single clothes hooks to ensure the aesthetic feeling after installation.
2. Drill holes: After determining the installation location, it is best to use a marker to draw the hole positions and draw all the required holes. Then use an electric drill to drill the holes. However, you should pay attention to the size of the holes. Generally, refer to the size of the holes on the coat hooks.
3. Fixing: After drilling the holes, you can drive the expansion bolts or wooden sleepers into them, and determine the corresponding installation bolts according to the material of the clothes hook. Then align the coat hook with the bolt, and finally tighten it with screws.